Data rate and record time

Blackmagic URSA Cine calculator

Choose the URSA Cine model first, then constant bitrate or constant quality, a resolution, a frame rate and a Blackmagic RAW setting. Data rates use the method in Blackmagic’s own BRAW calculator, and frame rates stop at the maximum Blackmagic lists for each model.

Camera
Resolution
Frame rate
BRAW setting

Data rate

0MB/s

 

Record time

0min

 

Figures are approximate. Data rates use the method in Blackmagic’s own BRAW calculator: the pixel count at 12 bits per pixel, divided by the compression ratio, plus a 4 KB frame header and the audio track. The 12K LF uses the same formats and pixel counts as Blackmagic’s PYXIS 12K calculator, and Blackmagic’s URSA Cine chart gives the same 1194 MB/s for 12K open gate at 24 fps (3:1). For the 17K 65, Blackmagic publishes a chart at full resolution and 24 fps (3:1 = 1700 MB/s), and the other 17K formats are scaled from it by frame size. Constant quality settings change with the image, so they are shown at their highest data rate. Where Blackmagic lists a maximum frame rate only for some formats, the others are limited to the open-gate maximum of the same size. The 12K LF 100G uses the same figures; its 4.6K B4 crop (up to 240 fps) and the Immersive’s constant quality modes are not included because Blackmagic does not publish their data rates. Record time is worked out from the data rate and the media size (1 GB = 1000 MB). Sources: Blackmagic Design, URSA Cine Blackmagic RAW, URSA Cine tech specs and the PYXIS BRAW calculator.