Lens and frame tools

Crop factor, anamorphic & aspect ratio

Three free tools for planning lenses and framing before a shoot. Crop factor shows how a lens frames on any of 44 cinema cameras and matches lenses between an A camera and a B camera. Anamorphic works out the desqueezed frame, the delivery crop and monitor frame lines for any squeeze, including Vertiscope. Aspect ratio sizes the active picture inside any delivery container, with masks and a cheat sheet to download.

Pick a camera, a recording format and a lens, then compare it with a film frame or a second camera. The drawing shows both frames at true scale over a reference photo.

A Your camera

mm
B Compare with

Match the view by

Crop factor–
Equivalent focal length–

Recorded areas drawn to scale over a reference photo
ABReference photo: Dubai skyline by Atif Balouch
Recorded area A
–
Diagonal A
–
Horizontal angle of view
–
Vertical angle of view
–
Recorded area B
–
Diagonal B
–

Data rate calculator for this camera

Crop factor questions

What is crop factor?

Crop factor compares the size of two image areas: the diagonal of the reference frame divided by the diagonal of your recorded area. Above 1, the lens frames tighter than it would on the reference; below 1, as on the GFX ETERNA 55 in GF mode, it frames wider.

Why does the same lens frame differently on two cameras?

Each camera and recording format uses a different part of the lens’s image circle. A smaller recorded area shows less of the image, so the same lens looks longer.

Does crop factor change exposure or depth of field?

The f-stop sets exposure, so a T2.8 lens exposes the same on any camera. Depth of field changes when you reframe: on a smaller format you use a shorter lens for the same shot, which gives more depth of field. As a rough guide, multiply the f-stop by the crop factor to compare depth of field with the reference format.

Should I match lenses by diagonal or by width?

Diagonal is the standard crop factor and suits formats with the same shape. Width keeps the horizontal angle of view the same, which is better when an A camera and a B camera record different aspect ratios.

How do I know if a lens covers my format?

Look at the diagonal of the recorded area under the drawing. The lens’s image circle needs to be at least that size. For example, a 26.21 × 13.82 mm Super 35 area has a diagonal of about 29.6 mm, so a lens built for Super 35 covers it, while a 43.63 × 32.71 mm open gate needs a large-format lens.

Where do the sensor sizes come from?

Every recorded area comes from the camera maker’s published figures, such as ARRI’s data rate calculator, RED’s tools data, Canon’s manuals and Fujifilm’s sensor chart. Where a maker gives only the full sensor size, crop modes are worked out from the photosite count. The note at the bottom of the page lists the sources.

Anamorphic questions

How do I work out the desqueezed aspect ratio?

Multiply the recorded aspect ratio by the lens squeeze. A 6:5 frame (1.2:1) with a 2x lens gives 2.4:1, and a 16:9 frame (1.78:1) with a 1.33x lens gives about 2.36:1.

Which squeeze suits my camera format?

Tall formats such as 4:3, 6:5 or open gate pair well with 2x lenses for a scope frame. Wider formats such as 16:9 or 17:9 suit 1.3x to 1.5x lenses, which reach a similar look with little or no crop.

What is the difference between stretching and compressing?

Stretching widens the image to its true shape and keeps every recorded line, so files get wider. Compressing keeps the recorded width and reduces the height, which makes smaller files with less vertical detail. Both give the same aspect ratio.

Why does an anamorphic lens look wider than its focal length?

The squeeze fits a wider view across the sensor. A 50 mm 2x lens gives the horizontal view of a 25 mm spherical lens, with the vertical view of a 50 mm. The calculator shows both.

How do I use the frame lines PNG?

Download it at the recorded resolution and load it as a custom frame line or overlay on your monitor, for example SmallHD, Atomos or Teradek. Keep the monitor’s desqueeze off for the squeezed version, so the lines match the recorded image.

What is Vertiscope?

Vertiscope turns the anamorphic lens by 90 degrees, so the squeeze works on the height of the frame. It creates tall images for vertical delivery, such as 9:16 for social platforms.

About these figures. They are approximate and meant for planning. Each recorded area comes from the camera maker’s published figures: ARRI’s Formats and Data Rate Calculator, RED’s tools data, Canon’s lens multiplication factors, Kinefinity’s optical format tables, Fujifilm’s sensor mode chart, and the sensor sizes in the specifications from Sony, Blackmagic Design, Panasonic, Nikon, DJI, Achtel and Pixboom. Where a maker gives only the full sensor size, crop modes are worked out from the photosite count. Anamorphic formats show the area on the sensor, while the horizontal angle of view allows for the squeeze. Lens breathing, distortion and focus distance are not included. Always check framing on the camera before the shoot.